Raritan Computer SX - Manual (Page 129)

C HAPTER 12: C OMMAND L INE I NTERFACE 111
Sendeventlog Command
The sendeventlog command sends the local logfile to a remote FTP server.
The syntax of the sendeventlog command is:
sendeventlog [ip ipaddress] [login login] [password password]
[path pathname] [file filename]
The sendeventlog command options are described in Table 13.
Table 13 Sendeventlog Command
C OMMAND O PTION D ESCRIPTION
ip ipaddress FTP server IP address
login login FTP Server login name
password password FTP Server password
path pathname FTP server path. For example, /ftphome
file filename Filename on FTP server to save log. For example, sxlogfile
Sendeventlog Command Example
admin > Config > Log > sendeventlog 72.236.162.187 login acy
password pasraritansword path sxlogfile file log 32
Vieweventlog Command
The vieweventlog command displays the local log file.
The syntax of the vieweventlog command is:
vieweventfile
Vieweventlog Command Example
admin > Config > Log > vieweventlog
Configuring Modem
The modem menu provides access to commands used to configure modem access. Callback
(dialback) occurs when the originator of a call is immediately called back in a second call as a
response to the first dialin. Configure modem dialin first and then enable dialback. Dialin and
Dialback should be enabled on the device used for modem communication (local, RADIUS,
LDAP, or TACACS+).
Table 14 Configuration: Modem Commands
C OMMAND D ESCRIPTION
dialback Enable/Disable the modem dial-back. Modem must be enabled for this to work.
dialin Enable/Disable Modem and PPP settings.
[<enable|disable>][server IP] [client IP]