Raritan Computer SX - Manual (Page 173)

C HAPTER 13: I NTELLIGENT P LATFORM M ANAGEMENT I NTERFACE 155
Interfaces:
open Linux OpenIPMI Interface [default]
imb Intel IMB Interface
lan IPMI v1.5 LAN Interface
Commands:
raw Send a RAW IPMI request and print response
i2c Send an I2C Master Write-Read command and print
response
lan Configure LAN Channels
chassis Get chassis status and set power state
power Shortcut to chassis power commands
event Send pre-defined events to MC
mc Management Controller status and global enables
sdr Print Sensor Data Repository entries and readings
sensor Print detailed sensor information
fru Print built-in FRU and scan SDR for FRU locators
sel Print System Event Log (SEL)
pef Configure Platform Event Filtering (PEF)
sol Configure and connect IPMIv2.0 Serial-over-LAN
tsol Configure and connect with Tyan IPMIv1.5 Serial-
over-LAN
isol Configure IPMIv1.5 Serial-over-LAN
user Configure Management Controller users
channel Configure Management Controller channels
session Print session information
firewall Configure firmware firewall (IPMIv2.0)
sunoem OEM Commands for Sun servers
picmg Run a PICMG/ATCA extended cmd
fwum Update IPMC using Kontron OEM Firmware Update
Manager
shell Launch interactive IPMI shell
exec Run list of commands from file
set Set runtime variable for shell and exec
3. Type the IP address in the IP Address field.
4. Type your username in the Username field.
5. Type your password in the Password field.
6. Type an option in the Option field.
7. Type a command in the Command field.
8. Click on the IPMI Discover button. The system displays the results of your command.