Raritan Computer SX - Manual (Page 130)

112 D OMINION SX U SER G UIDE
Modem Menu Command Examples
admin > Config > modem > dialin enable true serverip 10.0.13.211
clientip 10.0.13.212
admin > Config > modem > dialback enable true
admin > Config> Modem > show modem
Modem Settings:
Dialin Enabled: 1
Server IP : 10.0.13.211
Client IP : 10.0.13.212
Dialback : Enabled
Dialback with local user.
Before a modem connection can be established, the local user that is going to be used for dialin
authentication should be configured. A new user can be added or an existing one could be
reconfigured with a correct dialback. The correct configured user (Dialback number is 129)
should have the following settings:
User Settings:
Login : Modem
Name : Dialback
Info: SX
Dialback: 129
Group :Admin
Active : 1
Dialin and Dialback should be enabled on the device used for modem communication.
When this configuration is set, the modem connection could be established. The user may use
various types of modem dial-up clients to accomplish a successful modem connection to the SX
device.
Dialback with remote Radius user (Cistron Radius v1.6.7)
Dialin and Dialback should be enabled on the device used for modem communication. Primary
(or/and Secondary) RADIUS Server Settings should be configured correctly and enabled on the
SX device:
admin > Config > Authentication > RADIUS > primaryradius
RADIUS Server Settings
----------------------------------------
Primary Server
Enabled - true
IP Address - 10.0.0.188
Port - 1812
Secret - qaz1wsx