Raritan Computer SX - Manual (Page 94)

76 D OMINION SX U SER G UIDE
Available events include:
• event.amp.notice.port.connection
• event.amp.notice.user.logoff
• event.amp.notice.backup
• event.amp.notice.restore
• event.amp.notice.config.directaccesslockout
• event.amp.notice.reboot
• event.amp.notice.boot
• event.amp.notice.config.datacom
• event.amp.notice.config
• event.amp.notice.upgrade
• event.amp.keyword
• event.amp.strongpasssword
• event.amp.banner
• event.amp.firewall
• event.amp.iptablesaved
• event.amp.security.clientauth
• event.amp.security.clientcert.ca
• event.amp.security.clientcert.crl.expired
• event.amp.security.clientcert.crl.updated
2. Type the email address to send the event in the Destination field.
3. Click OK.
Test the SMTP Logging
It is important that the SMTP server information be accurate so that the Dominion SX unit can
send messages using that SMTP server.
To verify that the information is correct and working:
1. Send a test email by selecting an event such as:
event.amp.notice.port connection.
2. Connect to a port and see if the message is received by the intended email target. If there are
problems, contact your SMTP administrator to make sure your SMTP server IP address and
authorization information are correct.
Configuring NFS Logging
Network File System (NFS) logging allows you to log all port activity to an NFS shared
directory. All user activity and user port logins and logouts are logged. There are two log files:
• Input Records all input (keystrokes) from users.
• Output Contains all the messages that come from the server into the console server.
This includes all user input that is echoed back from the managed device/server.
You must also enable port logging. For more information on port logging, see “Enable Port
Logging” above.