Raritan Computer SX - Manual (Page 34)

16 D OMINION SX U SER G UIDE
Change the Discovery Ports
The DSX has two discovery ports:
• TCP 5000 Common Socket Connection (CSC) discovery
• UDP 5000 Command Center (CC) discovery
If either of these ports is used by another application, you can change the discovery port number
in the DSX in the appropriate field and click OK.
Configuring the Network Service Settings
The table below indicates the default settings for the various network access services:
Service Default Setting
HTTP Enabled. The default port is 80. This can be changed.
HTTPS redirect is enabled by default. If HTTPS is also enabled, all HTTP
requests are automatically redirected to the HTTPS port (see below).
HTTPS Enabled. The default port is 443. This can be changed.
Encryption is set to SSL, but this can be changed to TLS.
Telnet Disabled for security reasons. This can be enabled and the port configured.
Local Port Access Enabled. The baud rate is set to 9600 bps, but this can be changed.
Direct Port Access Set to IP, but this can be changed to Normal or TCP port.