Ricoh AP3800C - Manual (Page 115)

Moving and Transporting the Printer
105
5
Moving and Transporting the Printer
R CAUTION:
Note
❒ The printer weights approximately 83 kg.
Repack the printer in its original packing materials for transporting.
Important
❒ Be sure to disconnect all cables from the printer before transporting it.
❒ The printer is a precision piece of machinery. Take care to avoid damage dur-
ing shipment.
Moving the Printer
R CAUTION:
Note
❒ The machine weighs is about 83 kg.
Moving the printer in the short distance
AAAA
Be sure to check the following points:
• The power switch is turned off.
• The power cable is unplugged from the wall outlet.
• The interface cable is unplugged from the printer.
BBBB
If you have installed external options, remove them.
CCCC
Be sure to close the bypass tray and the front cover.
• When moving the machine, each person should hold the handle, where two
are located on opposite sides, and lift slowly. Lifting it carelessly or dropping
it may cause an injury.
• When you move the printer, remember to unplug the power cord from the
wall outlet to avoid a fire or an electric shock.
• When you pull out the plug from the socket, grip the plug to avoid damaging
the cord and causing a fire or an electric shock.
• When lifting the machine, use the inset grips on both sides. Otherwise the
printer could break or cause injury if dropped.
• Before moving the machine, unplug the power cord from the outlet. If the
cord is unplugged abruptly, it could become damaged. Damaged plugs or
cords can cause an electrical or fire hazard.
JupP1k_GB_Mainte_F_FM.book Page 105 Thursday, August 22, 2002 4:23 PM