Manual adjust – Ricoh AP3800C User Manual
Page 49
Adjusting the Color Registration
39
2
Manual Adjust
Important
❒ Normally, do not perform manual
color adjustment.
AAAA
Press
{{{{Menu}}}}.
"Menu" appears on the panel dis-
play.
BBBB
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display
"Maintenance", and then press
{{{{Enter}}}}.
The maintenance menu is dis-
played.
CCCC
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display "Color
Regist.", and then press
{{{{Enter}}}}.
DDDD
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display "Man-
ual Adjust", and then press
{{{{En-
ter
}}}}.
EEEE
Confirm that "Print" is displayed
in the menu for printing the Test
Sheet, and then press
{{{{Enter}}}}.
The Test Sheet is printed. See p.41
“Test Sheet Samples”.
FFFF
Enter the corrective values for A
through L on the Test Sheet in or-
der.
Note
❒ Confirm the printed Test Sheet
to enter the correction values.
A Use {{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to enter the val-
ue (-7.0 to +7.0) shown next to
the whitest square, into box A
of the Test Sheet.
Note
❒ Pressing {{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} increas-
es or decreases the value in
0.5 units.
❒ Sometimes, there are two of
the whitest squares next to
each other. For example, if
the two squares of "+1" and
"+2" are the whitest, enter
"+1.5".
❒ You can adjust the color
alignment for each color in
the range of "-7.0 to +7.0".
❒ There is an area on the Test
Sheet for you to put down
the values of "A" through "L".
Menu:
Maintenance
Maintenance:
Color Regist.
Color Regist.:
Manual Adjust
ZDJS001J
Test Sheet:
Adjustment A:
(-7.0 +7.0) +0
Adjustment A:
(-7.0 +7.0) +2
JupP1k_GB_Mainte_F_FM.book Page 39 Thursday, August 22, 2002 4:23 PM