Ricoh AP3800C - Manual (Page 98)

Troubleshooting
88
4
Removing Misfed Paper
If a paper misfeed occurs, an error
message appears indicating the loca-
tion of the misfed paper on the panel
display. This printer has the auto-re-
covery function, by which misfed pa-
per is sent to the Standard Tray or
Right Cover. Usually, you can re-
move the misfed paper easily with
this function.
Detaching the 2 Tray Finisher
There are times when you might have
to detach the 2 Tray Finisher from the
printer to remove misfed paper. This
section describes how to detach the 2
Tray Finisher.
AAAA
Hold the handle at the top of the 2
Tray Finisher firmly with one
hand, pull the 2 Tray Finisher
straight out, and let go when it
stops.
The 2 Tray Finisher is detached
from the printer.
BBBB
Use both hands to push it straight
back in, and let go when it clicks
into place.
The 2 Tray Finisher is reattached to
the printer.
Important
❒ Attach the 2 Tray Finisher to the
printer after closing the Duplex
Reversal Unit.
ZDJP201J
ZDJP202J
JupP1k_GB_Mainte_F_FM.book Page 88 Thursday, August 22, 2002 4:23 PM