Ricoh AP3800C - Manual (Page 45)

Adjusting the Color Registration
35
2
Automatic color adjustment takes
about two minutes. When it com-
pletes, a check message is dis-
played.
Press
{{{{Enter}}}} to return to the color
adjustment menu.
GGGG
When you have made all the set-
tings, press
{{{{On Line}}}}.
"Ready " appears on the panel dis-
play.
Fuser Adjust
When replacing the fusing unit
Note
❒ When "Toner is Almost Empty"
appears on the panel display, re-
place the toner cartridge and per-
form "Auto Adjust", and then
perform the "Fuser Adjust".
Reference
⇒ p.3 “Replacing the Toner Car-
tridge”
⇒ p.34 “Auto Adjust”
AAAA
Press
{{{{Menu}}}}.
"Menu" appears on the panel dis-
play.
BBBB
Press {{{{U U U U}}}} or {{{{T T T T}}}} to display
"Maintenance", and then press
{{{{Enter}}}}.
The maintenance menu is dis-
played.
CCCC
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to display "Color
Regist.", and then press
{{{{Enter}}}}.
DDDD
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to display "Fuser
Adjust", and then press
{{{{Enter}}}}.
Completed
Color Regist.:
Auto Adjust
Ready
Menu:
Maintenance
Maintenance:
Color Regist.
Color Regist.:
Fuser Adjust
ZDJS001J
JupP1k_GB_Mainte_F_FM.book Page 35 Thursday, August 22, 2002 4:23 PM