Ricoh AP3800C - Manual (Page 27)

Replacing the Development Unit
17
1
B Insert the Development Unit
along the rail, and push in
slowly until it stops.
C Holding the Development
Unit, pull out the tape slowly
in a level manner.
Important
❒ Be sure to pull out the tape to
avoid printer malfunction
during operation.
❒ The removed tape is dirty. Be
careful not to let it get in con-
t ac t w it h y o u r h a n d s o r
clothes.
IIII
Lower the inner cover slowly.
JJJJ
Tighten two screws using provid-
ed screwdriver.
Note
❒ Be sure to return the provided
screwdriver to its original posi-
tion on the inside of the front
cover.
KKKK
Turn the light brown lever clock-
wise.
ZDJH227E
ZDJH039J
ZDJH018J
ZDJH019J
ZDJH020E
JupP1k_GB_Mainte_F_FM.book Page 17 Thursday, August 22, 2002 4:23 PM