Ricoh AP3800C - Manual (Page 42)

Cleaning and Adjusting the Printer
32
2
Cleaning the Registration Roller
R CAUTION:
Clean the roller when replacing the
black Development Unit.
AAAA
Turn off the power switch and
unplug the power cable.
BBBB
Open the right cover shown in the
illustration.
The registration roller is set shown
in the illustration.
CCCC
Wipe around the registration roll-
er by turning with a soft damp
cloth.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
DDDD
Close the right cover by pushing
the area labeled "PUSH".
EEEE
Plug in the power cable and turn
on the power switch.
• The inside of the printer be-
comes very hot. Do not touch the
parts with a label indicating the
"hot surface", otherwise it could
cause a burn.
ZDJH206J
ZDJH703J
ZDJH704J
ZDJP708J
JupP1k_GB_Mainte_F_FM.book Page 32 Thursday, August 22, 2002 4:23 PM