Ricoh AP3800C User Manual
Page 47
Adjusting the Color Registration
37
2
When color shifting occurs
Perform this procedure when color
shifting occurs even after performing
"Auto Adjust".
AAAA
Load A4
L
L
L
L or larger paper in the
Bypass Tray.
Note
❒ Be sure to select paper size in
the "Paper Input" menu.
Reference
For details about paper size and
the procedure for loading paper
in the Bypass Tray, see p.64
“Load Paper in the Bypass
Tray”.
BBBB
Press
{{{{Menu}}}}.
"Menu" appears on the panel dis-
play.
CCCC
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display
"Maintenance", and then press
{{{{Enter}}}}.
The maintenance menu is dis-
played.
DDDD
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display "Color
Regist.", and then press
{{{{Enter}}}}.
EEEE
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display "Fuser
Adjust", and then press
{{{{Enter}}}}.
Important
❒ When the toner cartridge is al-
most empty, or Auto Adjust is
not finished, the following mes-
sage appears on the panel dis-
play and "Fuser Adjust" is not
available.
Confirm that the toner cartridge is
installed. The toner cartridge must
be installed. See p.3 “Replacing the
Toner Cartridge”.
If the toner cartridge is installed,
perform "Auto Adjust".
FFFF
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display "Cus-
tom Adjust", and then press
{{{{En-
ter
}}}}.
The following message appears on
the panel display.
Menu:
Maintenance
ZDJS001J
Maintenance:
Color Regist.
Color Regist.:
Fuser Adjust
Cannot Adjust
See User’s Guide
Fuser Adjust:
Custom Adjust
JupP1k_GB_Mainte_F_FM.book Page 37 Thursday, August 22, 2002 4:23 PM