Oki B 6300 - Manual (Page 15)

3.1 Installation Procedure for Internet Printing 11
3 Internet Printing
3.1 Installation Procedure for Internet
Printing
This section explains the installation procedure for printing using the Internet Printing
Protocol (IPP).
System Configuration
The printer supports Internet Printing Protocol (IPP). As Windows 2000/Windows XP/
Windows Server 2003/Windows Me is installed with the client software needed to output to
IPP printer, you can specify the printer to support IPP using the [Add Printer Wizard]. Using
IPP, you can print to a remote printer through the Internet or intranet.
The transport protocol for IPP can be TCP/IP.
Target Computers
The following computers support Internet printing:
Important
• For Internet printing from a Windows Me computer, the IPP port should be installed. For the IPP port
installation method, refer to the Windows Me manual.
Set Up Procedure
The setting procedure is as follows:
1. Setting up the printer
Set the IP address on the printer control panel.
Use the printer control panel or OkiWebRemote to set the IPP port to [Enable] (default:
[Disable]).
Connection OS Service/Client Protocol
IPP port
(TCP/IP) Windows 2000
Windows XP
Windows Server 2003 IPP port monitor Internet protocol (TCP/IP)
Windows Me IPP port monitor TCP/IP protocol
IPP client
(Windows Me/Windows 2000/Windows XP/
Windows Server 2003)
Internet