Oki B 6300 - Manual (Page 38)

34 6 Printing From UNIX
6.5 -C Option (lpr Command)
This section explains the functions which can be specified and printing operations which will
be affected by the -C option.
The -C option is available only when the SunOS directs the printer to enter the spool mode.
Important
• When the PostScript logical printer that was configured on the OkiWebRemote and -C option of “lpr”
command have been specified simultaneously, some of the actiions cannnot be guaranteed to wprk.
Also, when specifying the PostScript logical printer as a default printer on Unix, it is recommended not to
user the -C option by “lpr” command.
Function
The following items can be set up by using the -C option:
Note
• Any parameter other than below becomes invalid if specified.
Selecting a Paper Tray
When selecting a paper tray, either the paper size or the tray itself is specified. If the paper
size is specified, the printer automatically searches and selects the tray where the specified
paper is loaded.
The following parameters can be specified:
Note
• If several parameters are specified in one “lpr” command, data may not be printed correctly.
• The system default is used if no tray number is specified, a specified tray is not loaded, or paper of a
specified size is not loaded.
• This option is for specifying a paper size only. Paper is selected but the document size is not corrected
according to the paper size.
• If the print data specifies a paper tray, the tray specification by the data becomes valid and that by the -C
option becomes invalid.
• If an unacceptable combination is specified, the printer may not operate correctly.
• For some print language, the specification may be invalid.
Parameter Description
INTRAY1/intray1 Selects Tray 1.
INTRAY2/intray2 Selects Tray 2.
INTRAY3/intray3 Selects Tray 3 (option).
INTRAY4/intray4 Selects Tray 4 (option).
A4/a4 Selects the tray where A4 paper is loaded.
B5/b5 Selects the tray where B5 paper is loaded.
A5/a5 Selects the tray where A5 paper is loaded.
LETTER/letter Selects the letter size.
LEGAL/legal Selects the legal size (8.5 Ч 14).