Oki B 6300 - Manual (Page 67)

A.1 Using Telnet 63
2. Input the number of the item to set. Detailed information about the selected item is
displayed.
Note
• Each menu is configured with some levels. Set the settings by selecting the menus and items of each
level. For details about the items of each menu, refer to “The Items That Can Be Set Using the Telnet”
(P. 64).
3. After completing the settings, select [Back to prior menu] to return to the main menu.
4. Select [Exit setup] in the main menu, and then select [Save and Reset].
When the items needed to restart the printer are changed, the printer restarts.
Please select (1 - 99)? 2
No. Message Value (level.2)
-------------------------------------------------------------------
1 : AppleTalk : Enable
2 : SMB : Enable, TCP/IP, NetBEUI
3 : NetWare : Enable, TCP/IP IPX/SPX,
4 : LPD : Enable
5 : SNMP : Enable, UDP, IPX
6 : IPP : Enable
7 : Port9100 : Enable
8 : UPnP : Enable
9 : Receive Mail : Enable
10 : Mail Notification : Enable
11 : Internet Services : Enable
12 : Telnet : Enable
99 : Back to prior menu
Please select (1 - 99)?
Please select (1 - 99)? 99
No. Message Value (level.2)
---------------------------------------------------------------
1 : Machine Details
2 : Port Status
3 : Protocol Settings
4 : Display status
5 : IP Filtering Setup
6 : Internet Services Settings
98 : Set default (Network)
99 : Exit setup
Please select (1 - 99)?
Please select (1 - 99)? 99
No. Message Value (level.2)
---------------------------------------------------------------
1 : Save and Reset
2 : Exit without Saving
99 : Back to prior menu
Please select (1 - 99)? 1
Connection closed by foreign host.
%