6 printing from unix, 1 for printing from unix, System configuration – Oki B 6300 User Manual
Page 27: Target computers, Interface, Printing from unix, 6printing from unix
6.1 For Printing From UNIX
23
6
Printing From UNIX
6.1
For Printing From UNIX
This section explains the installation procedure for printing from a UNIX computer.
System Configuration
The printer uses the Line Printer Daemon Protocol (LPD) that supports TCP/IP as the
transport protocol. With the LPD, use the printer under a UNIX network environment.
The printer LPD supports Spool Mode where print jobs from clients are spooled once before
output and Non-spool Mode where print jobs are sequentially output without spooling.
Note
• When the LPD port is used, the printer can limit print instructions by IP addresses. For details, refer to
the Technical Reference Manual.
Target Computers
The target computers are as follows:
• Workstation or personal computer with RFC 1179 Line Printer Daemon Protocol
Interface
The printer LPD is available on the following interfaces:
• Ethernet 100BaseTX
• Ethernet 10Base-T
The applicable frame types conform to Ethernet II.
UNIX
LPD (TCP/IP)