Omega Vehicle Security freedom OM-550 - Manual (Page 15)

OM-550 u 10 u
2.1.5 THERMAL PAPER
Two thermal paper rolls are supplied for printing logged and programming data. The
paper is placed on the paper bail with the active side of the paper-inserted face down
into the rear paper feed slot. Refer to section 3.2 PAPER INSTALLATION for more
information.
2.1.6 BATTERY COVER
Four AA Batteries are supplied in the kit that must be installed prior to operation. The
Battery cover is located on the bottom side of the OM-550. To remove it simply slide it
toward the thermal paper roll (refer to section 3.1.1 BATTERY INSTALLATION for more
information).
2.1.7 DC JACK
Omega offers an optional AC Power Adapter and a DC Power Cable designed to
extend battery life. Both of these items are inserted into the DC Jack and then to the
proper power source (refer to section 3.1.2 CONNECTING THE AC POWER
ADAPTER and 3.1.3 CONNECTING THE DC POWER CABLE for more information).
2.1.8 SERIAL DATA PORT
The RS-232 Port transfers the logged data to a PC. The port uses a telephone-style
4P4C connector, shown in Figure 2-11:
Figure 2-11
SERIAL DATA PORT