Omega Vehicle Security freedom OM-550 - Manual (Page 73)

OM-550 DOS Software u 11 u
2.8.1 STATUS BAR
The top of the Hot Plot shows the File Name, Plot Title, and Time Stamp/X-Y Readout.
FILE NAME
PLOT TITLE
TIME STAMP/
X & Y READOUT
Status Bar
•
The File name is the name of the currently loaded experiment file. If the current
experiment data is not saved the file name will read “?????” in this location.
•
The Plot Title is the entry specified by the user using the Edit Plot Labels option
(See section 2.7 EDIT PLOT LABELS for details).
•
The Time stamp is the data and time that the last reading was logged by the
OM-550 during experiment.
•
When the mouse pointer is placed over the Data Graph, the Time stamp is
replaced by X & Y-axis data.
This is a fast way to get information from the Hot Plot graph because the user
can use the mouse to read Times and Values anywhere on the plot.
The X and Y Readout shows the Day, Time, and Y-Axis Value at the place
where the mouse pointer is currently positioned. The Day and Time are shown
as D-HH:MM:SS. For example, 1-12:33:22 means day 1, 12 hours, 33 minutes,
and 22 seconds.
If there are several channels of data on the graph, the Y-Axis Value belong to
the channel identified by the Y-Axis Labels, along the left side of the graph. It will
be the last channel selected. On color displays, the Plot and Labels will be the
same color.
Screen resolution may limit the accuracy of these X-Y Readout Values to less
than that of the actual data displayed in the X-Cursor Data Table near the bottom
of the screen.
The X-Y Readout can also give Delta information: When using the Magnify Tool
the absolute X-Y Values are replaced with Delta-X and Delta-Y Values which are
the lengths of the sides of the magnification rectangle.