Onkyo FR-N3X - Manual (Page 16)

16
◆
Turning the unit on and off
Press STANDBY/ON on the unit or on the remote con-
troller.
If you press the same button again, the unit will turn
off and enter standby mode.
The FR-N3X has the following two power modes.
Standby mode:
The display remains turned off
(see page 11).
Power On mode: The FR-N3X enters Power On
mode when you press the
STANDBY/ON button on the unit
or remote controller while the unit
is in Standby mode. The FR-N3X
operates normally in this mode.
Tip!
When you start playing (or turn on the power to) an
Onkyo CD recorder or cassette tape deck that is con-
nected to the FR-N3X via an
cable and audio pin
cables, the power to the FR-N3X is automatically
turned on. Also, if you turn on or off the power to the
FR-N3X, the power to such a device is automatically
turned on or off (standby).
◆
Adjusting the volume
Operating with the unit
Turn VOLUME clockwise to increase the volume and
counterclockwise to decrease the volume.
Using the remote controller
Press VOLUME on the remote controller.
◆
Selecting a source
You can select CD, MD, FM, AM, or connected exter-
nal audio/video equipment (LINE and CD-R) as the
audio source.
Operating with the unit and remote controller
Understanding preparatory and common operations
This section explains the following preparatory and common operations: turning the unit
on and off, selecting a source, adjusting the volume, etc.
Source selector buttons
VOLUME
STANDBY/ON
STANDBY
indicator
INPUT buttons
VOLUME
/
STANDBY/
ON
Buttons Usage
CD/MD Press this button to toggle between
CD and MD.
FM/AM Press this button to toggle between
FM and AM.
OTHER INPUTS Press this button to select LINE or
CD-R.
/