Onkyo FR-N3X - Manual (Page 66)

66
The following table explains the messages that appear in the display.
Messages
Message Meaning
MD Blank Disc A recordable MD without disc or track names is inserted.
Cannot Copy You tried to create a second digital copy from a digitally dubbed MD (see “Rules for digital recording” in
the right column).
Cannot Edit You tried to edit a playback-only disc.
Cannot Rec You tried to record onto a playback-only disc.
Cannot Set You tried to set a timer while another timer was operating.
CD Dub Fail CD dubbing could not be activated.
Complete The editing operation has been completed.
Cannot Read The disc is abnormal (scratched or missing a TOC).
Disc Full The disc is full (see “System limitations” on page 68).
Full You tried to enter a character over the maximum character capacity while naming a disc, track, or group,
etc.
Impossible You tried to edit a disc using a function not available for some reason other than an MD system limitation.
MD Writing The unit is writing the recorded or edited contents to the MD.
Mecha Error An error occurred in the unit’s internal mechanism.
Memory Full You tried to store a 26th track or a 31st channel, exceeding the unit’s capacity.
Name Full The naming capacity of the disc or unit has reached its limit.
No Change The name has not been changed.
CD/MD No Disc There is no disc in the unit.
Protected The inserted disc is record-protected.
Recording You tried to switch to another source while recording, or to perform a CD or tuner operation that is dis-
abled during recording.
Retry Error The recording attempt failed due to consecutive disturbances from scratches on the MD or from applied
vibration.
Signal Wait The MD recorder has entered Signal Wait mode.
Text Protect The CD text is copyrighted.
Time Protect You tried to repeat double-speed dubbing using the same CD.
TOC Error The unit failed to read or record onto a disc.
Miscellaneous