Directional iinkage, Connecting the am antenna, Assembling the am loop antenna – Onkyo FR-N3X User Manual

Page 7: Connecting the am antenna cable, Connecting the am loop antenna, Connecting an am outdoor antenna

Advertising
background image

7

Directional Iinkage

Do not use the same antenna for both FM and TV (or
VCR) reception since these signals may interfere with
each other. If you must use a common FM/TV (or
VCR) antenna, use a directional linkage type splitter.

Connecting the AM antenna

Assembling the AM loop antenna

Assemble the loop antenna as shown in the following
illustration.

Connecting the AM antenna cable

Connecting the AM loop antenna

The AM loop antenna is for indoor use only. Set it in
the direction and position in which you receive the
clearest sound. Locate it as far as possible away from
this unit, televisions, speaker cables, and power
cords.

Connecting an AM outdoor antenna

When reception is not satisfactory with the supplied
AM loop antenna alone, an outdoor antenna is recom-
mended.
The outdoor antenna will be more effective if it is
stretched horizontally above or outside a window.
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock,

grounding is necessary. Follow item 14 of the
“Important Safeguards” on page 3 when you install
the outdoor antenna.

(Continued on the next page)

Directional Iinkage
type splitter

To FR-N3X

To TV (or VCR)

Insert into the hole.

1. Press down

the lever.

2. Insert the

wire into
the hole.

3.

Release the
lever to lock
the wire in
place.

outdoor antenna

Advertising