Onkyo FR-N3X - Manual (Page 23)

23
◆
Changing the display information
Press DISPLAY on the unit repeatedly to change the display as follows:
◆
Using the remote controller
While the MD is stopped
Total number
of tracks Total playing
time
“DISC REMAIN”
is lit while the remain-
ing recordable time
on the disc is dis-
“DISC NAME”
is lit while the disc
name is displayed.
Disc name
*2 *3
*1 If you insert an MD produced only for playback, this information will not appear.
*2 If the disc or tracks are not named, only the total number of tracks or the track number appears in the display.
See “Naming an MD and its tracks, and preset channels” on page 52.
*3 If the MD is not recorded, “MD BlankDisc” appears in the display.
If the disc or song title is long:
You can scroll long names across the display by pressing SCROLL on the remote controller (see below).
During playback or pause
The elapsed time of the playing track
The remaining time of the playing track
The name of the playing track
*2
“TRACK”
is lit while the elapsed time of
the playing track is displayed.
“TRACK NAME”
is lit while the name of
the playing track is dis-
played.
“TRACK REMAIN”
is lit while the remaining
time of the playing track is
displayed.
Total number
of tracks The remaining
recordable time
*1
“DISC”
is lit while the disc infor-
mation is displayed.
Press to switch the source
to MD.
Press to scroll a long name
across the display.
Press the number buttons as
described in the examples
below to play back the
desired track.
Adjust the volume level.
Press VOLUME to raise the
level and VOLUME to lower
the level.
The track
to play
represents the tens digit.
8
10
34
103
, ,
Press
, ,
,
Press to select the track to
play.
Press to play.
If the MD is in the unit, playback starts.
The unit in standby mode turns on
automatically.
Press to stop playback.
• Press to locate the beginning of
the playing or paused track. Press
repeatedly to select the previous
tracks in reverse order.
• To select the next track in order,
press repeatedly.
Press to locate a particular
point in a track.
Press and hold for fast-forwarding,
and for fast-reversing during
playback or pause until you locate the
desired point.
Press to pause.
To resume playback, press Pause ( )
or MD .
8
10/0
4 3 --/---
1 --/--- --/---
3 0
--/---