Oricom M5200 Series - Manual (Page 13)

11
BASIC OPERATION
Basic Operation
During standby
Cordless handset's LCD display
HANDSET 1 : Handset number
: Current battery level
: A constant signal icon indicates the
cordless handset is linked to the base unit. When signal icon is
flashing the handset needs to be re-registered (see page 25).
Answering an incoming call
With cordless handset
When there is an incoming call, the phone rings and flashes on the display. If a CID
record is received,
flashes and the caller information is displayed. The auto answer
function allows you to answer a call by simply lifting the handset from the base when it
is ringing.
1
. Press key to answer the call if hansdet is off the base.
2
. Press key again to end the call.
HANDSET
Note:
If the power is not connected to the base unit.
The cordless handset CANNOT operate.
With base unit
When there is an incoming call,
1
. Press key to answer the call.
2
. Press key again to end the call.