Oricom M5200 Series - Manual (Page 28)

CORDLESS HANDSET OPERATION
26
REMOVE HS
PIN ?
REMOVE HS ?
Language setting
To select the display language,
1
. Press key during standby mode.
2
. Press or key to select
“LANGUAGE” from the display.
3
. Press key to enter the mode.
4
. Press or key to select Language options on the display.
5
. Press key to confirm and return to standby mode.
LANGUAGE
Remove handsets
During standby mode,
1
. Press key.
2
. Press or key to select “REMOVE
HS” from the display.
3
. Press key to confirm. The display on the
right is shown.
4
. Enter the default value 0000.
5
. Press key to confirm and the display on
the right is shown.
6
. Press the numeric keys (1-4) to enter the
handset number.
7
. Press key to confirm and return to standby mode.
8
. Press key to confirm and return to standby mode.
9
. LCD screen will display HS 1,2,3 or 4 and antenna icon will not flash.
Note: If the base is full and cannot add any more handsets, you will hear a tone.
See the next section to remove a handset.