Oricom M5200 Series - Manual (Page 26)

CORDLESS HANDSET OPERATION
24
Call transfer between cordless handsets
When there is an incoming external call,
1
. Press INT key. The display on the right is shown.
2
. Key the handset number (1, 2, 3, or 4) you wish
to transfer.
3
. Press key to exit Intercom mode and return to standby mode.
Transfer a speakerphone call from the base unit to the cordless handset
If there is an incoming external call,
1
. Press key on the base unit.
2
. Press on the cordless handset to pick up the call.
3
. Press key again to cancel the call transfer.
Conference calls
This function allows 3 parties (yourself + external call + intercom call ) to be
connected at the same time.
When there is an incoming external call,
1
. Press INT key. The display on the right is shown.
2
. Key the handset number (1, 2, 3, or 4) you wish
to invite to the conference.
3
. Press key to pick up the call.
4
. Press and hold INT key to go into the 3-way conference mode.
5
. Press INT key to go back to Intercom mode.
6
. Press key to exit Intercom mode and return to standby mode.