Oricom M5200 Series - Manual (Page 25)

23
CORDLESS HANDSET OPERATION
Multi-handset Operation
Your M5200 series phone can have up to 4 handsets registered to the base unit. Each
handset has its own number HS-1, HS-2, HS-3 and HS-4 shown on the left-hand side
of the display. With 2 or more handsets you can:
• Make intercom calls while on an external call
• Switch between an external call and intercom call
• Transfer an external call from one handset to another
• Set a 3-way conference call between yourself, an external call and intercom call
Note:
• A maximum of 1x external call and 2x intercom calls can take place at the same time.
• If you make an external call + another handset is on line = result in a busy tone.
• You can make an intercom call when the other handset is in progress.
Intercom function
To make an intercom call,
1
. Press INT key, during standby mode.
The display on the right is shown.
2
. Key the handset number (1, 2, 3, or 4) you wish
to call.
When there is an intercom call, the display on the right is shown.
1
. Press or INT key to answer the intercom call.
2
. Press or INT key again to end the call.
Depicts Handset-2 calling