Oricom M5200 Series - Manual (Page 32)

ANSWERING MACHINE OPERATION
30
OGM (Outgoing Messages)
M5200 has two OGM message modes:
OGM1 (Announcement One) mode:
Callers can hear a pre-recorded message “Please leave a message after the beep”
and the unit records the caller's message.
OGM2 (Announcement Two) mode:
Callers can hear the other pre-recorded message “Please call later”. Under this mode,
the caller will NOT have the opportunity to leave a message.
You can also record your own personalized greeting (from 3 seconds to 120 seconds).
Note: The default setting is OGM1 (Announcement One).
OGM setting
Press key to switch between OGM1 and OGM2.
Record OGM
1
. Press key to select OGM1 mode or OGM2 mode.
2
. Press and hold ANS key until you hear a long beep and see light flash.
3
. Speak into the microphone (15cm from the base unit’s microphone).
4
. Press key to stop recording, the machine will play back recording for
review.
Note: If the OGM is less than 3 seconds, it is not valid. The machine will stop
automatically after 2 minutes.