Oricom M5200 Series - Manual (Page 6)

WARNINGS AND SAFETY INFORMATION
4
Avoid exposure of this telephone to moisture
or liquid.
To prevent electric shock, do not open the
handset or base cabinet.
Avoid metallic contact (e.g. metal clips, keys)
between the battery contacts and charging
conductors.
There is a slight chance that the telephone
could be damaged by an electrical storm. It is
recommended that users unplug the phone
from the mains supply and telephone socket
during a storm.
Do not use the handset in an explosive hazard
area such as where there is gas leaking.
Follow the local regulations regarding the
disposal of your packing materials, exhausted
batteries and used phone. Wherever possible,
recycle those materials.
We advise that this phone should not be used
near intensive care medical equipment or by
persons with pacemakers.
Clean with a dry, soft, lint-free cloth. Never
use cleaning agents, particularly aggressive
solvents.
Because the phone works by sending radio
signals between base station and handset,
wearers of hearing aids may experience interference in the form of a humming noise.
Your phone can interfere with electrical
equipment such as answering machines, TV
and radio sets, clock radios and computers if
placed too close. It is recommended that you
position the base unit at least one metre from
such appliances.
This telephone complies with applicable
safety requirements for exposure to radio
waves (EMR). The mean power of this
telephone does not exceed 20mW limit at
which point testing is required.
The earpiece of the handset may attract small
metal objects such as staples and pins. Care
should be taken when placing the handset
near these items.
This telephone is not designed for making
emergency telephone calls when the mains
power fails.
Always have a corded phone available to be
able to make and receive calls to emergency
services if the mains power fails.
Do not use your telephone during an electrical
storm thunderstorm as it is possible to get an
electric shock.
Refer to information contained in White pages
directory.
WARNINGS AND SAFETY INFORMATION
Use only the mains adaptors supplied with this
product. Incorrect adaptor polarity or voltage
can seriously damage the unit. Adaptor for base:
Input: 240 VAC 50 Hz Output: 6 VDC 400 mA
Adaptor for Charger:
Input: 240 VAC 50 Hz Output: 7.5 VDC 100 mA
CAUTION