Oricom M5200 Series - Manual (Page 34)

ANSWERING MACHINE OPERATION
32
ICM (Incoming Messages)
Record ICM
During OGM 1 mode, the machine can record callers’ messages.
During recording mode, the light will flash.
The machine will stop automatically after recording 2 minutes.
Or you can stop recording by pressing key.
Note: The CID number is displayed if you have subscribed to that service.
The Message recording time is from 3 seconds to 120 seconds.
Play ICM
Incoming messages are played back in the sequence they were recorded. Day and
time of the recording is announced before each message.
When there are new messages, only new messages are played back. Old messages
can be played back only when all new messages have been played back.
Answer / Message light flashes when new messages are waiting. To play messages:
1
. Press key.
2
. To pause, press key.
3
. Press key to resume.
4
. To replay the current message, press ANS key during message playing.
5
. To replay the previous message, press ANS key twice.
6
. To skip to next message, press MEMO key.
7
. Press key to stop playing.
Note: No announcement will be played back, if the day/time is not set properly.