Connecting a tv or projector, Connecting the av receiver/av amplifier —continued – Onkyo TX-SA706 User Manual
Page 25
25
Connecting the AV Receiver/AV Amplifier
See “Connecting Components with HDMI” on page 33 for HDMI connection information.
• With connection
, you can listen to and record audio from your TV and listen in Zone 2.
• To enjoy Dolby Digital and DTS, use connection
or
. (To record or listen in Zone 2 as well, use
and
,
or
and .)
If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver
to the AV receiver/AV amplifier and use its tuner to listen to TV programs through the AV receiver/AV
amplifier (see pages 28 and 30).
Connecting a TV or Projector
The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the
composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO MONITOR OUT, use the AV
receiver/AV amplifier’s display when changing settings.
Connection
AV receiver/AV amplifier
Signal flow
TV
COMPONENT VIDEO MONITOR OUT
⇒
Component video input
MONITOR OUT S
⇒
S-Video input
MONITOR OUT V
⇒
Composite video input
GAME/TV IN L/R
⇐
Analog audio L/R output
DIGITAL COAXIAL IN 2 (VCR/DVR)
⇐
Digital coaxial output
DIGITAL OPTICAL IN 1 (GAME/TV)
⇐
Digital optical output
Step 1: Video Connection
Choose a video connection that matches your TV (
,
, or
), and then make the connection.
A B
C
Step 2: Audio Connection
Choose an audio connection that matches your TV (
,
, or
), and then make the connection.
a
b
c
a
b
c
a
b
a
c
A
B
C
a
b
c
Y
COAXIAL
OUT
P
B
COMPONENT VIDEO IN
P
R
S VIDEO
IN
AUDIO
OUT
VIDEO
IN
L
R
OPTICAL
OUT
b
c
A
B
C
B
a
C
TV, projector,
etc.
Connect one or the other
Connection
must be assigned (see page 44)
b
Hint!