Onkyo TX-SA706 - Manual (Page 9)

9
Front & Rear Panels
—Continued
The page numbers in parentheses show where you can find the main explanation for each item.
ON/STANDBY button (40)
This button is used to set the AV receiver/AV ampli-
fier to On or Standby.
STANDBY indicator (40)
This indicator lights up when the AV receiver/AV
amplifier is in Standby mode, and it flashes while a
signal is being received from the remote controller.
ZONE 2 indicator (99)
This indicator lights up when Zone 2 is selected.
Input selector buttons (54)
These buttons are used to select from the following
input sources: MULTI CH, DVD, VCR/DVR,
CBL/SAT, GAME/TV, AUX, TAPE, TUNER, CD,
PHONO.
The [MULTI CH] button selects the DVD analog
multichannel input.
Remote control sensor (14)
This sensor receives control signals from the remote
controller.
Display
See “Display” on page 10.
SETUP button
This button is used to access the onscreen setup
menus that appear on the connected TV.
Arrow, TUNING, PRESET and ENTER
buttons
When the AM or FM input source is selected, the
TUNING [ ]/[ ] buttons are used to tune the tuner,
and the PRESET [
]/[ ] buttons are used to select
radio presets (see page 58) (TX-SR706 only).
When the onscreen setup menus are used, they work
as arrow buttons and are used to select and set
items. The [ENTER] button is also used with the
onscreen setup menus.
RETURN button
This button is used to return to the previously dis-
played onscreen setup menu.
MASTER VOLUME control (54) and indicator
This control is used to adjust the volume of the AV
receiver/AV amplifier to –
∞ dB, –81.5 dB through
+18.0 dB (relative display).
The volume level can also be displayed as an abso-
lute value. See “Volume Setup” on page 89.
PURE AUDIO button and indicator (62)
Selects the Pure Audio listening mode. The indica-
tor lights up when this mode is selected. Pressing
this button again selects the previous listening
mode.
PHONES jack (56)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
ZONE 2 and OFF buttons (99)
The [ZONE 2] button is used to select the input
source for Zone 2.
The [OFF] button is used to turn off the output of
Zone 2.
ZONE 2 LEVEL button (100)
Used when adjusting the volume level of Zone 2.
TONE, [–] & [+] buttons (55)
Used to adjust the tone (bass and treble).
MOVIE/TV button (62)
Selects the listening modes intended for use with
movies and TV.
MUSIC button (62)
Selects the listening modes intended for use with
music.
GAME button (62)
Selects the listening modes intended for use with
video games.
DISPLAY button (55)
This button is used to display various information
about the currently selected input source.
DIGITAL INPUT button (96)
Selects the options for automatic audio input selec-
tion setup.
DIMMER or RT/PTY/TP button (55, 60)
This button is used to adjust the display brightness.
On the European model, this is the [RT/PTY/TP]
button, and it’s for RDS (Radio Data System). See
“Using RDS (not North American model)” on
page 59.
MEMORY or Re-EQ button (58, 83)
This button is used when storing or deleting radio
presets.
On the TX-SA706, this button is used to turn the
Re-EQ function on or off.
TUNING MODE or LATE NIGHT button (57, 83)
This button is used to select the Auto or Manual
tuning mode.
On the TX-SA706, this button is used to turn the
Late Night function on or off.
SETUP MIC jack (49)
The included speaker setup microphone is con-
nected here for automatic speaker setup.
AUX INPUT
This input can be used to connect a camcorder,
game console, and so on. There are jacks for
S-Video, composite video, analog audio, and optical
digital audio.