Onkyo TX-SA706 - Manual (Page 41)

41
First Time Setup
This section explains the settings that you need to make before using the AV receiver/AV amplifier for the very first time.
Carry out the settings for the AV receiver/AV amplifier
by using the Onscreen Setup Menu.
The settings of the AV receiver/AV amplifier can be
changed using the Display.
Onscreen Setup Menus and Display
As each item in the Onscreen Setup Menus is selected,
the selected items will be displayed one by one.
Note:
During the Automatic Speaker Setup, messages, etc.,
that are displayed on the TV screen will appear in the
Display.
Using the Onscreen Setup Menus
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected
to the composite video or S-Video MONITOR OUT,
or the COMPONENT VIDEO MONITOR OUT, use
the AV receiver/AV amplifier’s display when chang-
ing settings.
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select submenu and then
press [ENTER].
The submenu appears.
Press the [SETUP] button to close the
menu.
Press the [RETURN] button to return
to the previous menu.
1
2
1
2
MENU
1. Input Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Lock Setup
Using the Display to change the
settings
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The submenu item appears on the dis-
play.
2 Use the Up and Down [ ]/[ ] but-
tons to select submenu and then
press [ENTER].
The setting item appears on the display.
Press the [SETUP] button to close the
menu.
Press the [RETURN] button to return
to the previous menu.
MENU
1. Input Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Lock Setup
Onscreen Setup Menus
Display