Sylvania SREC427 - Manual (Page 19)

19
CLOCK SETTING
Manual Clock Setting
NOTE:
• Your clock setting will be lost if either there is a power failure
or this unit has been unplugged for more than 3 seconds
when you set the clock manually.
7
Press K/L buttons to select AM or PM, then
press ENTER button.
Clock menu will appear. The settings will be acti-
vated.
8 Press SETUP button to exit.
Although seconds are not displayed, they begin
counting from zero.
When "Auto Clock Setting" is selected to
"Manual", change it to "OFF" as following
steps.
Repeat steps [1] to [3] in "Manual Clock Setting".
4
Select "Auto Clock Setting" using K/L buttons,
then press ENTER button.
5 Select "OFF" using K/L buttons, then press
ENTER button.
6
Press SETUP button to exit.
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
OFF
ON
VCR DVD
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
OFF
JAN / 12 / 2004 (MON)
09 : 24 AM
ON
VCR DVD
1
Press SETUP button to display SETUP/DISC
menu.
SETUP/DISC menu will appear.
2 Select "SETUP" using s/B buttons, then press
ENTER button.
SETUP menu will appear.
3
Select "Clock" using K/L/s/B buttons, then
press ENTER button.
Clock menu will appear.
4 Select "Clock Setting" using K/L buttons, then
press ENTER button.
A clock setting window will appear.
Press ENTER button.
Default date will appear.
5 Enter the date (month / day / year) using K/L
buttons.
Press s/B buttons to move the cursor.
6
Enter the time (hour / minute) using K/L but-
tons.
Press s/B buttons to move the cursor.
Setup > Clock
Clock Setting
Auto Clock Setting OFF
Daylight Saving Time
JAN / 12 / 2004 (MON)
12 : 00AM
ON
VCR DVD
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
OFF
- - - / - - / - - - - ( - - - )
- - : - -
ON
VCR DVD
ENTER
SETUP
/ / /
T2020UA_01-44 04.8.10 3:38 PM Page 19