Sylvania SREC427 - Manual (Page 57)

D
UBBING
57
VCR DVD-RW (VR) DVD-RW (Video) DVD-R
You can copy a DVD disc to a videotape or copy a
videotape to a DVD disc. This function will be possi-
ble only if the DVD disc or the tape is not copy pro-
tected. Before starting this function, prepare for the
recording on the DVD-R/RW disc or the videotape.
Refer to pages 48-55, 28-30.
NOTE: Load Recording Media
• Insert a DVD disc or videotape with the available recording
space.
REC SPEED
VCR DVD VCR DVD
STOP C (DVD)
STOP C (VCR)
The tape's record tab should be intact.
The videotape should have enough available space
to record the DVD disc.
1
Press REC SPEED button twice, and select a
recording speed using K/L buttons.
2 Press VCR DVD button on the remote control
or on the main unit.
DVD to VCR duplication will start.
3
Press STOP C (DVD) or STOP C (VCR) button
on the remote control or on the main unit to stop
the recording.
NOTE: DVD Dubbing
• Duplicating operation from DVD to VCR is only available
when DVD stops or during DVD playing, and when VCR
stops.
• You cannot make a dub from a DVD disc protected by copy-
right, such as a prerecorded DVD.
The DVD recording speed and format should be
selected first. Refer to "Recording" on page 48 and
"Formatting" on pages 49-50.
1 Press REC SPEED button first, and select a
recording speed using K/L buttons.
2
Press VCR DVD button on the remote control
or on the main unit.
VCR to DVD duplication will start.
3 Press STOP C (DVD) or STOP C (VCR) button
on the remote control or on the main unit to stop
the recording.
NOTE:
• After starting VCR to DVD duplication, the picture may be
distorted because of the auto tracking function. This is not a
malfunction. Be advised to playback the tape until the pic-
ture is stabilized, then set the starting point you wish to start
recording, and start VCR to DVD duplication.
VCR to DVD DVD to VCR
OPERA
TING D
VD RECORDER
RECORDING / DUBBING
T2020UA_45-LAST 04.8.10 3:41 PM Page 57