Sylvania SREC427 - Manual (Page 22)

T
V FUNCTIONS
OPERATING TV
Watching TV Program
1
Press POWER button to turn on the unit.
2
Select the desired channel using CHANNEL
K
/L buttons or the Number buttons on the
remote control.
If the TV/VCR/DVD is connected to a cable box
or satellite box, the TV/VCR/DVD must be on
channel 3 or channel 4, then the channel to be
viewed must be selected on the cable box or
satellite box.
3 Adjust the volume to the desired listening level
using VOLUME X/Y buttons.
4
Adjust picture controls for a natural looking
image. Refer to "Adjusting Picture" on page 23.
5 When you finish watching TV, press POWER
button to turn the power OFF.
POWER
CHANNEL K/ L
VOLUME X/ Y
Number
Setting Sleep Timer
The sleep timer function automatically turns off the
power in the specified time period.
1
Press SLEEP button.
Sleep timer menu will appear.
2
Press SLEEP button repeatedly to change the
sleep time.
The timer can be set up to 2 hours, by 30 min-
utes each time you press SLEEP button.
3
To cancel the sleep timer, press SLEEP button
repeatedly until "SLEEP
TIMER [OFF]" is dis-
played.
NOTE:
• If you disconnect the unit from the AC outlet, or if you have
a power failure, the sleep time setting will be lost.
• This function does not operate du ring Recording mode.
SLEEP TIMER [OFF]
SLEEP
22
Degaussing
Magnetism from nearby appliances and unshielded
speaker systems might affect the color of the TV
picture.
If this happens, move this TV/VCR/DVD away from
the appliance. If the color is still not correct, unplug
the power cord, then plug it in again 30 minutes
later.
T2020UA_01-44 04.8.10 3:38 PM Page 22