Omponent names, Main unit – Sylvania SREC427 User Manual
Page 7
C
OMPONENT NAMES
7
0
1
Cassette compartment (VCR): Insert a tape here.
0
2
Disc tray (DVD): Place a disc on the tray when open.
0
3
S-VIDEO input jack (DVD only): Use to connect the
S-Video output of external video components with an
S-Video cable.
0
4
VIDEO input jack: Use to connect external video
components with a standard video cable.
0
5
AUDIO (L/R) input jack: Use to connect external
video/audio components with standard audio cables.
0
6
Receiving window for remote control signal:
Sensor that receives signal from the remote control unit.
0
7
POWER button: Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode. Press to cancel the timer-
standby mode, then turn the unit on.
0
8
VOLUME K/L buttons: Press to adjust the sound
level.
0
9
C
STOP/A EJECT button (VCR):
A
EJECT button- Press to remove the tape from the
unit.
C
STOP button- Press to stop tape movement. Press
to stop the proceeding timer recording in VCR.
10
B
PLAY button (VCR): Press to start playback.
11
I
RECORD button (VCR): Press once to begin
recording. Press repeatedly to start a One-Touch
Recording.
12
RECORD indicator (VCR): Blinks during VCR
recording.
13
DUBBING button (VCR
➔DVD): Press to start VCR to
DVD duplication.
14
VCR/DVD indicator: Shows the operating status.
Indicator for VCR illuminates during VCR playing, and
one for DVD illuminates during DVD playing.
15
CHANNEL K/L buttons: Press to change the chan-
nel up or down. During DVD playback, press to
change the DVD chapter.
16
C
STOP button (DVD): Press to stop playback or record-
ing. Press to stop the proceeding timer recording in DVD.
17
B
PLAY button (DVD): Press to start or resume play.
18
I
RECORD button (DVD): Press once to start
recording. Press repeatedly to start a One-Touch
Recording.
19
RECORD indicator (DVD): Illuminates when you
have programmed the DVD or VCR timer recording,
and blinks during DVD recording.
20
DUBBING button (VCR
DVD): Press to start DVD to
VCR duplication.
21
A
OPEN/CLOSE button (DVD): Press to open or
close the disc tray.
22
HEADPHONE jack: To connect headphone (not sup-
plied) for personal listening.
Main Unit
15
16
12
14
11
10
9
7
8
5
1
4
6
3
17 18
2
13
20
19
21
22
AUDIO OUT
COAXIAL
2
3
1
Rear
1
AUDIO OUT COAXIAL jack (DVD sound only):
Use to connect an AV receiver with a coaxial digital
input jack.
• Only DVD, CD and MP3 audio will be output from
this jack.
2
AC Power Cord: Connect to a standard AC outlet to
supply power to this unit.
3
ANT. (Antenna input) jack: Use to connect an anten-
na, or cable system.
Front
CONTENTS / COMPONENT NAMES
T2020UA_01-44 04.8.10 3:38 PM Page 7