Olivetti ECR 6900 - Manual (Page 23)

15
ENGLISH
High Digit Lock Out Specify Tender Amount
0 = No HDLO 0 = Not complusory
1 = 0.01 - 0.09 1 = Compulsory
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
Change Given Drawer Open
0 = Enabled 0 = Enabled
1 = Disabled 1 = Disabled
NOTE: The Change option setting applies to all types of
payment media excluding cash (Change Given is always
enabled for this type of payment).
To program the payment media:
1. Control lock key position: PRG.
2. Specify the [1-digit Media Type] and press .
3. Enter the [4-digit Status].
4. Press .
Example: For check payment media, define a high-digit lock
out of 6 (9999.99), with non-compulsory entry of tender
amount, change given and drawer open disabled.
Type/Press:
Programming In-Store Embedded Price
Barcodes
The barcode reader must be able to read 8- or 13-digit EAN/
UPC barcodes. EAN/UPC codes read from a product barcode
label represent a standard numbering structure that identifies
the product being sold.
The barcode with embedded price of an article has a specific
structure that depends on the country in which it will be used
and to the EAN/UPC code you wish to use. You can program
up to 10 different barcode configurations.
The following parameters need to be defined to program your
barcode:
Code Type Country-specific code
prefix
0 = Long (13-digit) 000 - 999
1 = Short (8-digit) (always enter 3 digits)
Code prefix length Price length
1 to 3 digits Max. 8 digits
Check digit Barcode price currency
0 = Disabled 0 = Local
1 = Enabled 1 = Foreign Currency no. 1
2 = Foreign Currency no. 2
3 = Foreign Currency no. 3
4 = Foreign Currency no. 4
A line appears on the third digit from the left of the display to
indicate that the cash register is in Training Mode.
To exit the training facility from the REG mode:
1. Control lock key position: REG.
2. Type your [4-digit password] for training mode and
press .
Programming a Training Mode Password
A training mode password prevents unauthorized access to
the training facility from REG mode.
1. Control lock key position: PRG.
2. Press and then press
.
3. Type your [4-digit password] and press .
NOTE: Do not assign a password of 0000.
Example: Define training mode password 9876.
Type/Press:
Cash Register Identification Number
The 4-digit machine identification number is printed on the
sales receipts, journal records and management reports
issued by the cash register. It is useful to identify the activities
of this cash register when more than one cash register is
used in the business.
1. Control lock key position: PRG.
2. Type your [4-digit identification number] and
press .
Example: Define identification number 0006.
Type/Press:
Payment Media Status
For payment media programming, you can specify a 4-digit
status for each of the media types.
Media Types
1 = Cash
2 = Check
3 = Charge card
4 = Credit card 1
5 = Credit card 2
The 4-digit status consists of [HDLO] and flags for [Specify
Tender Amount], [Change Given] and [Drawer Open].
Switch to Training mode password definition mode
Password
Payment media status
Payment type