Olivetti ECR 6900 - Manual (Page 24)

16
PO and RA Key Status Programming
For these keys you can specify a 2-digit Status consisting
of a
[HDLO] and a [Print Receipt Header] flag.
High Digit Lock Out Print Receipt Header
0 = No HDLO 0 = Enabled
1 = 0.01 - 0.09 1 = Disabled
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
To program the key:
1. Control lock key position: PRG.
2. Press .
3. Enter the [2-digit status].
4. Press .
To program the key:
1. Control lock key position: PRG.
2. Press .
3. Enter the [2-digit status].
4. Press .
Example: For the key, define a HDLO of 4 (99.99)
with no receipt header printing.
Type/Press:
Discount or Add-on Amounts (+/- Key)
A High Digit Lock Out (HDLO) and a positive or negative
status can be assigned to the key. You can limit the
number of digits, i.e. the maximum value of a minus or plus
key operation, from 1 to 6 digits. This makes sure that
amounts do not exceed a maximum value. You can also
assign a discount (-) or add-on (+) status to this key so that
specific amounts are discounted or added on.
Make your selections for this feature from the following
options (defaults in bold):
High Digit Lock Out Discount or Add-on
0 = No HDLO 0 = Negative (discount)
1 = 0.01 - 0.09 1 = Positive (add-on)
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
To program an in-store price barcode:
1. Control lock key position: PRG.
2. Enter your in-store code [1 to 10] that identifies the
configuration of the barcode that you are programming.
3. Press .
4. Enter the code type [0 or 1].
5. Enter the max. 3-digit country-specific code prefix [000
to 999]. Three digits must alwas be used; for example,
to define a prefix of 24, enter [024].
6. Enter the number of digits [1 to 3] that the country-
specific code prefix consists of. For example, if your
code prefix is 24, enter [2].
7. Enter the number of digits [1 to 8] that the price
incorportated in the bar code consists of.
8. Define whether to use a price check digit or not.
9. Enter the currency identifier [1 to 4].
10. Press .
No Sales Receipt Key Status
Depending on how it is programmed, the key can be
activated in MGR mode, or in both MGR and REG modes, to
open the cash drawer without the need to register a sales
amount, or when changing money for a non-sales code.
The 6-digit Status consists of flags for [Drawer Open],
[Register Mode], [Print Receipt], [Print Receipt Header],
[Input Electronic Journal] and [Consecutive Receipt
Number Update]. Defaults are indicated in bold.
Drawer OpenRegister Mode
0 = Enabled
0 = REG and MGR
1 = Disabled 1 = MGR only
Print Receipt Print Receipt Header
0 = Enabled 0 = Enabled
1 = Disabled 1 = Disabled
Input E.J. Consec. Rec. No. Update
0 = Enabled 0 = Enabled
1 = Disabled 1 = Disabled
To program the key:
1. Control lock key position: PRG.
2. Type and press .
3. Enter the [6-digit status].
4. Press .
Example: Define a status enabling drawer open in MGR
mode only, receipt printing with consecutive numbers, and
no header or electronic journal input.
Type/Press:
Switch to key status
definition mode
6-digit No sales receipt key status
2-digit status