3 s-ls, Overview, 3 s-ls overview – Toshiba S20LP User Manual
Page 10
9
6
F
3
B
0
3
5
6
1.3 S-LS overview
The S-LS (TOSLINE-S20 Loader System) on a personal computer (PC) monitors station
conditions, reads/writes control data, and sets up parameters. The transmission parameters set by
S-LS is stored in the S20LP-station's built-in EEPROM.
Connection between S-LS and S20LP-station is made by an loader cable, that is the same cable
as for T-PDS.
The following are the details of the menu. Select an intended station in the Station Connection
Diagram window for display and specify the window in the menu or the toolbar.
[File]
[Display Scan Address List]
Displays the Scan Address List window.
[Display Station Down Information]
Displays Down Information when the local station is downed.
[Save Files All Station’s Information]
Saves the setup information of all stations in the file.
[Exit]
Terminates the application.
[Menu]
[Setting Information]
Displays the Setting Information window.
[Data Access]
Displays the Data Access window.
[RAS Information]
[Online Map]
Displays the Online Map window.
[Scan Healthy Map]
Displays the Scan Healthy Map window.
[Loop Map]
Displays the Loop Map window.
[Station Status]
Displays the Station Status window.
[Station Down Information]
Displays the Station Down Information.
[RAS Counter Information]
Displays the RAS Counter Information
[Online/Standby Request]
Displays the Online/Standby Request window.
[Test Request]
Displays the Test Request window.
[Option]
[Station Display Position]
[Registration]
Registers the display positions of the stations rearranged.
[Display]
Reflects the display positions of the registered stations in the window.
[Normal]
Displays the stations rearranged in the ascending order of smaller display
position numbers.
[Communication Environment Setting] Displays the Communication Environment Setting window.
[Window]
[Display Small Size]
Displays the Station Connection Diagram in small size.
[Help]
[Contents]
Displays the Help window.
[Key Word Search]
Displays the Retrieve window in Help.
[Version Information]
Displays the information of the application version.