Toshiba S20LP - Manual (Page 54)


53

6 F 3 B 0 3 5 6
6) Response time limit
Designates a time used to limit the response time from the remote station in 0.1 second
units.
F E 0
A+7
This code indicates the type of register code in which the local or remote station transmission
source data is stored. See “T-series Instruction Set (Ladder, SFC)” (UM-TS03***-E004).
RID Meaning RID Meaning
0000H XW/YW registers ∗∗ 05H F register (0 - 8191)
*1
0001H W register ∗∗ 06H F register (0 - 65535)
*2
0002H LW register 0007H T register
*3
0003H RW register 0008H C register
*3
0004H D register 0009H SW register
*1 Includes the expansion F registers. One bank has 8k words (0 to 8191).
F 7 0
05H
*2 Includes the expansion F registers(Only T3H). One bank has 64K words (0 to 65535).
F 7 0
06
Bank number ... 00H: T2N internal registers
F0000 to F1023
01H to 03H: Expansion F registers
F0000 to F8191
Bank number ... 00H: T3H internal registers
F0000 to F32767
01H: Expansion F registers (IC card)
F0000 to F65535
02H: Expansion F registers (IC card)
F0000 to F57343
0: Use the user-specified value (0.1 to 3276.7 seconds)
1: Use the default value of 30 seconds.