Toshiba S20LP - Manual (Page 15)


14

6 F 3 B 0 3 5 6
3. Setting for data linkage
3.1 Station number setting
Each station should have unique station number. If a station number is duplicated, the S20LP
network cannot be established. Allowable station number is 1 to 64. To set the station number,
two rotary switches (STNH and STNL) are provided on each station. STNH is for 10's digit
setting, and STNL is for 1's digit setting.
(For example)
STNH = 1
STNL = 5
3.2 Settings on T-PDS
The following settings are necessary for the T2N/T3H on which the S20LP-station is mounted.
(1) I/O allocation
Allocate the S20LP-station as "TL-S".
<T-PDS screen example 1>
P: PLC
A: I/O Allocation
A: I/O Allocation
Station number is 15