Toshiba S20LP - Manual (Page 8)


7

6 F 3 B 0 3 5 6
• Status LEDs:
Indicate the status of the S20LP-station.(see Section 5.3)
S20LP port for T2N (PU245N)
SRUN Lit Station is normal
Not lit Down mode
SONL Lit Online mode (Scan transmission is executing)
Blink Standby mode (Scan transmission is not executing)
Not lit Offline mode (Scan transmission is not executing)
SACC Lit T2N is accessing the port
Not lit T2N is not accessing the port
For SN325
STN Lit Station is normal
Not lit Down mode
ONL Lit Online mode (Scan transmission is executing)
Blink Standby mode (Scan transmission is not executing)
Not lit Offline mode (Scan transmission is not executing)
SCAN Lit Scan transmission is executing
Not lit Scan transmission is not executing
ACC Lit T3H is accessing the station
Not lit T3H is not accessing the station
LOOP Lit LOOP is normal (Cut off mode for main terminal station)
Not lit LOOP is abnormal
TX1 Lit TRM1/RCV2 is normal
Not lit TRM1/RCV2 is abnormal
TX2 Lit TRM2/RCV1 is normal (Note 1)
Not lit TRM2/RCV1 is abnormal (Note 1)
(Note 1) When the SN325 operates a terminal station, this LED is normally not lit.