Toshiba S20LP - Manual (Page 29)


28

6 F 3 B 0 3 5 6
Necessary settings for this data linkage configuration are as follows.
• Settings on T-PDS
Allocate the S20LP-station as "TL-S" (for T3H) by using the automatic I/O allocation
command or the manual I/O allocation function of the T-PDS in T3H. And automatically
allocate the S20LP-station as "E/S" in T2N.
By using the Network assignment function of the T-PDS, sssign the Blocks to cover the
using W registers.
For STN #1 T3H and STN #3 T2N: set LINK for Blocks 1 to 5 (W0000 to W0319)
For STN #2 T2N: set LINK for Blocks 1 to 4 (W0000 to W0255)