Toshiba AUXILIARY CABINET 431M - Manual (Page 15)

7 4300 Series Ancillary Cabinets Installation and Operation Manual
4.3 Transporting
The ancillary cabinet may be packed in a crate for extra protection during transportation. Avoid impact or
vibration against the ancillary cabinet during transportation. DO NOT expose the ancillary cabinet directly
to water.
WARNING
DO NOT tilt the ancillary cabinet more than 10° from upright
position.
Tilting the ancillary cabinet more than 10° may cause crushing,
trapping or other personal injuries.
CAUTION
DO NOT transport, move, store, or place the ancillary cabinet on
its sides.
Excessive force applied from heavy components inside may damage
the ancillary cabinet.
Avoid vibration or shock exceeding 0.5 g.
Failing to observe this precaution may cause damage to the ancillary
cabinet.
DO NOT allow the ancillary cabinet to suffer shock or impact
when unpacking.
Tools used to remove packaging materials may cause damage to the
ancillary cabinet.
DO NOT install the ancillary cabinet where water may fall on it.
Water may cause electrical shock, personal injury or ancillary cabinet
failure.
DO NOT push or pull on the sides of the packaging or the
ancillary cabinet to move it. Always use a crane, forklift, or
pallet jack for transporting and positioning the ancillary cabinet.
Pushing/pulling on the sides of the unit to move it may result in damage
to the ancillary cabinet.