Tektronix 1705A - Manual (Page 71)

Installation
3- 8 1705A Spectrum Monitor
For applications such as consoles, shown in Figure 3-8, the instrument can be
mounted with front molding flush or protruding from the console. In both cases,
allow approximately 3 inches of rear clearance for bnc and power cord connec-
tions.
Requires four 0.156” holes below
the 1700F00 cabinet to secure the
instrument to the shelf.
For Flush Front Panel: Cut hole
the same size as the monitor front
molding to allow the monitor front
panel to align with the custom
panel surface.
For Protruding Front Molding:
Cut hole in panel the same size as the
opening in the monitor cabinet to al-
low the front-panel molding to cover
the hole.
Figure 3-8: Considerations for custom installation of an instrument
To mount the 1705A safely, attach it to a shelf strong enough to hold its weight,
using the four 0.156-inch diameter holes in the bottom of the 1700F00 cabinet.
See Figure 3-8.
Custom Installation