Tunturi E30R - Manual (Page 8)

8
O
WNER
’S
MANUAL
MALFUNCTIONS
Despite continuous quality control, defects and
malfunctions caused by individual components
may occur in the equipment. In most cases it’s
unnecessary to take the whole device in for
repair, as it’s usually sufficient to replace the
defective part.
If the equipment does not function properly
during use, contact your Tunturi dealer
immediately. Always give the model and serial
number of your equipment. Please state also
the nature of the problem, conditions of use
and purchase date.
If you require spare parts, always give the
model, serial number of your equipment and
the spare part number for the part you need.
The spare part list is at the back of this manual.
Use only spare parts mentioned in the spare
part list.
TRANSpORT AND STORAGE
Please follow these instructions when carrying
and moving the equipment, because lifting it
incorrectly may strain your back or risk other
accidents:
Go behind the equipment. By holding onto
the back part of the frame and the seat
handlebar, incline the equipment forward. We
recommend that you use a protective base
when transporting the equipment.
To prevent the equipment malfunctioning,
store in a dry place with as little temperature
variation as possible and protected from dust.
TECHNICAL SpECIFICATIONS
Length ...........................................171 cm
Width .............................................70 cm
Height ............................................117 cm
Weight ...........................................60 kg
This product meets the requirements of
the EU’s EMC Directives on electromagnetic
compatibility (89/336/EEC) and electrical
equipment designed for use within certain
voltage limits (73/23/EEC). This product
therefore carries the CE label.
This product meets EN precision and safety
standards (Class HA, EN-957, parts 1 and 5).
Due to our continuous policy of product
development, Tunturi reserves the right to
change specifications without notice.
NOTE! The instructions must be followed
carefully in the assembly, use and maintenance
of your equipment. The warranty does not
cover damage due to negligence of the
assembly, adjustment and maintenance
instructions described herein. Changes or
modifications not expressly approved by
Tunturi Oy Ltd will void the user’s authority to
operate the equipment!
We wish you many enjoyable trainings with
your new Tunturi training partner!