TP-Link TL-R460 - Manual (Page 17)

TL-R460 Cable/DSL Router User Guide
10
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the Router.
Figure 3-6
You can check it follow the steps below:
)
Note:
Is the connection between your PC and the Router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter
should be lit.
Is the TCP/IP configuration for your PC correct?
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254, the gateway must be 192.168.1.1.
3.2 Login
Once your host PC is properly configured, please proceed as follows to use the
Web-based Utility: Start your web browser and type the private IP address of the Router
in the URL field: 192.168.1.1.
After that, you will see the screen shown below, enter the default User Name admin and
the default Password admin, and then click OK to access to the Quick Setup screen.
You can follow the steps below to complete the Quick Setup.