TP-Link TL-R460 - Manual (Page 44)

TL-R460 Cable/DSL Router User Guide
37
forwards all the ports at the same time. Any PC whose port is being forwarded must have
its DHCP client function disabled and should have a new static IP address assigned to it
because its IP address may change when using the DHCP function.
Figure 4-24
To assign a computer or server to be a DMZ server:
Step 1: Click the Enable radio button
Step 2: Enter the local host IP address in the DMZ Host IP Address field
Step 3: Click the Save button.
) Note:
After you set the DMZ host, the firewall related to the host will not take effect.
4.5.4 UPnP
Choose menu “Forwarding→UPnP”, you can view the information about UPnP in the
screen (shown in Figure 4-25). You can click Refresh to update the Current UPnP
Settings List before viewing the information.
The Universal Plug and Play (UPnP) feature allows the devices, such as Internet
computers, to access the local host resources or devices as needed. UPnP devices can
be automatically discovered by the UPnP service application on the LAN.
Figure 4-25
¾ Current UPnP Status - If you want to use the Router’s UPnP function, please click
Enable button. If you don’t want use the function, please click Disable button.