2 quick setup, 3 network, 1 lan – TP-Link TL-R460 User Manual
Page 23: Quick setup, Network
TL-R460
Cable/DSL Router User Guide
16
shown, you can then establish the connection by clicking the button.
¾
Traffic Statistics: This field displays the router's traffic statistics.
¾
System Up Time: This field displays the time of the router running from the time it is
powered on or is reset
.
4.2 Quick Setup
chapter 3"Quick Installation Guide."
4.3 Network
Choose menu “Network”, you can see the submenus under the Network menu: LAN,
WAN and MAC Clone.
Figure 4-2
Click any of them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.
4.3.1 LAN
Choose menu “Network→LAN”, you can configure the IP parameters of the LAN on the
screen below.
Figure 4-3
¾
MAC Address - This field displays the physical address of the LAN. The value
can't be changed.
¾
IP Address - Enter the IP address for the LAN of the Router, the formal is in
dotted-decimal notation (the factory default value is 192.168.1.1).
¾
Subnet Mask - Enter the subnet mask for the LAN of the Router, this address code
determines the size of the network. Normally use 255.255.255.0 as the subnet mask.