TP-Link TL-R460 User Manual
Page 75
TL-R460
Cable/DSL Router User Guide
68
Figure B-6
)
Note:
1) If the above configuration takes effect, for LAN administrators, you should enter
the address field of the web browser to access the Router.
2) For remote access to the router, you should enter the address for example:
(presume the WAN IP address of the router is
61.45.120.20) to access the Router.
Step 2: To add a WEB Server: Login to the router, click the menu Forwarding→Virtual
Servers on the left of your browser, On the Virtual Server screen, add a Virtual
Server rule as shown in the next screen: configure “80” as the “Service Port”,
and enter your IP address (assuming 192.168.1.188 for an example),
remember to “Enable” and “Save”.
Figure B-7